The Stowageroom
is made up of three opening doors. Behind the outer two doors there are two
ATCS-inserts. The middle door contains a smaller AAS-insert. All three inserts
can be completely removed from Biolab.
The Centrifuges are part
of the Incubator. They can spin either inside or outside the
Incubator.The incubator panel can be removed, the
centrifuges slid out individually.
The incubator door can be opened, so
the centrifuge can be seen throught the opened door. The incubator panel can
also be removed to give a beter view of the centrifuge.
The section containing the HMdrawer
and the Stowageroom can be extended. This enables u to see the microscope
through a glass window on top.
The Handling Mechanism front can be
opened to show the Handling Mechanism.
The BioGlovebox can be
extended from a stored position to a working position. The font lid can be
opened to have a look inside the BioGlovebox.
The Temperature Control Unit 1 &2
can be openend and the TCU tray containing Experiment Containers can be removed.
|
Atelier Guarniero creates high quality
space models, many of which are part of the ESA space program and
of the International Space Station (ISS). Each scale model is made
exactly matching the real spacecraft using information provided
by the European space agency. At the moment we are working on a
new line of rocket models beginning with the Soyuz launcher. We
are planning to create a full line of rockets to complement our
collection of satellites. Make sure to check back often to see pictures
of every new satellite we produce.
|
|
